Style 220 | Reinforcing Sleeve

Product Description

Product Features:

Similar in design to the Style 110 Dresser Sleeve, Style 220 Reinforcing Sleeves encompass a “pumpkin” sleeve design and are commonly used to repair corrosion pits and stress cracks. Style 220 is a split sleeve design with two halves. They also provide permanent reinforcement over welded joints, collar joints, threaded collars, compression couplings and flanges. The Style 220 Dresser Sleeve also provides a means of being “double sure” of safety against pipe-end pullout when used to reinforce pipelines on high pressure piping systems.

The steel construction properties of the Style 220 sleeve lends itself to field welding without preheating, using ordinary field welding procedures. The two halves of split sleeve is factory prepared with standard welding bevel, machine flame cut for uniformity and ease of welding, and come with a drilled vent hole to preclude pressure build up between sleeve and pipe. Style 220 Dresser sleeves are supplied in all sizes, lengths and thicknesses as shown in charts. Larger sizes and lengths available upon request. 

Material:

Small (3/4” ID through 2” ID)
Body: Meets ASTM-A513, GR1015
Yield Strength: 35,000 PSI Min. | 48,000 PSI Max.
Standard (2” ID through 24” ID)
Body: High strength, low carbon steel meeting ASTM A572 GR 50/ ASTM A588 
Yield Strength: 50,000 PSI Min. | 70,000 PSI Max.
Temp. Ratings: -20° to +150°F
Size
Nominal Size (inch)
$ 476.10

All Domestic products are melted and manufactured in USA.

All Dresser Products are domestically manufactured by GE / Dresser at the plant in Pennsylvania, USA.

All Import Valves, Hammer Unions, Y-Strainers & Frac Tank Supplies are assembled and tested in USA with components made in China

All Import Buttweld, Socketweld & Threaded Fittings are made in China/Taiwan/India

All Import Flanges are made in China/Taiwan/India

All materials are ASTM / ASME equivalent. Visit our Knowledge Central page for more information on material grades, material chemistry and ASTM, ASME & ANSI myth.

If you have any question, call 281.516.8100 or email sales@trupply.com.

Related Products