Trupply LLC XML Google Shopping Feed-Smith2 https://www.trupply.com Smith Blair Cast Coupling - 441 (2.34-9.85) 2 2.34 to 2.63 2.34 to 2.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579240966 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579240966 new 77.27 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000263-900 SB Coupling Adult Unisex SB Coupling 8.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 2.5 2.65 to 2.88 2.65 to 2.88 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579306502 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579306502 new 99.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000288-900 SB Coupling Adult Unisex SB Coupling 9.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 2.85 to 3.13 2.85 to 3.13 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579339270 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579339270 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000313-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.44 to 3.62 3.44 to 3.62 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579372038 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579372038 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000350-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.80 to 3.96 3.80 to 3.96 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579404806 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579404806 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000396-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.97 to 4.14 3.97 to 4.14 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579437574 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579437574 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000414-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.44 to 3.62 2.85 to 3.13 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579470342 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579470342 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-03500313-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.80 to 3.96 2.85 to 3.13 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579503110 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579503110 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-03960313-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.80 to 3.96 3.44 to 3.62 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579535878 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579535878 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-03960350-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.97 to 4.14 2.85 to 3.13 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579568646 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579568646 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04140313-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.97 to 4.14 3.44 to 3.62 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579601414 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579601414 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04140350-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 3 3.97 to 4.14 3.80 to 3.96 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579634182 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579634182 new 126.94 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04140396-900 SB Coupling Adult Unisex SB Coupling 14.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.00 to 4.15 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579666950 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579666950 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000415-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.22 to 4.50 4.22 to 4.50 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579699718 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579699718 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000450-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.46 to 4.86 4.46 to 4.86 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579732486 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579732486 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000486-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.80 to 5.10 4.80 to 5.10 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579765254 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579765254 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000510-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 5.11 to 5.45 5.11 to 5.45 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579798022 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579798022 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000545-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.22 to 4.50 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579830790 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579830790 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04500415-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.46 to 4.86 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579863558 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579863558 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04860415-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.46 to 4.86 4.22 to 4.50 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579896326 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579896326 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-04860450-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.80 to 5.10 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579929094 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579929094 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05100415-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.80 to 5.10 4.22 to 4.50 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579961862 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579961862 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05100450-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 4.80 to 5.10 4.46 to 4.86 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998579994630 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998579994630 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05100486-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 5.11 to 5.45 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580027398 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580027398 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05450415-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 5.11 to 5.45 4.22 to 4.50 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580060166 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580060166 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05450450-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 5.11 to 5.45 4.46 to 4.86 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580092934 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580092934 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05450486-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 4 5.11 to 5.45 4.80 to 5.10 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580125702 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580125702 new 158.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-05450510-900 SB Coupling Adult Unisex SB Coupling 19.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.00 to 6.15 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580191238 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580191238 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000615-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.28 to 6.63 6.28 to 6.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580224006 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580224006 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000663-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.56 to 6.96 6.56 to 6.96 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580256774 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580256774 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000696-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.90 to 7.22 6.90 to 7.22 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580289542 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580289542 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000722-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 7.25 to 7.65 7.25 to 7.65 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580322310 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580322310 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000765-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.28 to 6.63 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580355078 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580355078 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-06630615-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.56 to 6.96 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580387846 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580387846 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-06960615-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.56 to 6.96 6.28 to 6.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580420614 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580420614 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-06960663-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.90 to 7.22 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580453382 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580453382 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07220615-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.90 to 7.22 6.28 to 6.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580486150 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580486150 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07220663-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 6.90 to 7.22 6.56 to 6.96 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580518918 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580518918 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07220696-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 7.25 to 7.65 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580551686 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580551686 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07650615-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 7.25 to 7.65 6.28 to 6.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580584454 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580584454 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07650663-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 7.25 to 7.65 6.56 to 6.96 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580617222 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580617222 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07650696-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 6 7.25 to 7.65 6.90 to 7.22 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580649990 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580649990 new 203.53 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-07650722-900 SB Coupling Adult Unisex SB Coupling 25.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.00 to 8.16 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580682758 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580682758 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000800-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.40 to 8.63 8.40 to 8.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580715526 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580715526 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000863-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.54 to 9.11 8.54 to 9.11 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580748294 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580748294 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000911-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.05 to 9.30 9.05 to 9.30 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580781062 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580781062 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000930-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.05 to 9.45 9.05 to 9.45 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580813830 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580813830 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000945-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.46 to 9.85 9.46 to 9.85 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580846598 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580846598 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-00000985-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.40 to 8.63 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580879366 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580879366 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-08630800-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.54 to 9.11 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580912134 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580912134 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09110800-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 8.54 to 9.11 8.40 to 8.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580944902 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580944902 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09110863-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.05 to 9.45 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998580977670 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998580977670 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09450800-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.05 to 9.45 8.40 to 8.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581010438 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581010438 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09450863-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.05 to 9.45 8.54 to 9.11 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581043206 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581043206 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09450911-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.46 to 9.85 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581075974 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581075974 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09850800-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.46 to 9.85 8.40 to 8.63 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581108742 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581108742 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09850863-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.46 to 9.85 8.54 to 9.11 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581141510 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581141510 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09850911-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Cast Coupling - 441 (2.34-9.85) 8 9.46 to 9.85 9.05 to 9.45 https://www.trupply.com/products/smith-blair-cast-coupling-4412-34-9-85?variant=998581174278 Cast Coupling- Straight & Reducing Transitions - Alloy Bolts &Nuts - 441Product Features: Cast Couplings Application: To join plain end pipes with the same or different O.D.s by changing followers and gaskets. Key Features: • Heavy cast Ductile Iron parts for long life • Meets applicable AWWA C219 Standards • Flanges and gaskets can be mixed and matched on the same size nominal sleeve • Most couplings are stab fit, making installation easy. No disassembly is required • Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories • One sleeve per nominal pipe size takes the guesswork out of deciding which sleeve size to choose • Flanges are color-coded by pipe type: Red for iron pipe size O.D.; Blue for Ductile O.D.; and gray for Asbestos-Cement O.D. • Gaskets and flanges are permanently marked with a part number and range to facilitate proper selection • Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications Materials Specifications (subject to change) SLEEVE: Ductile Iron ASTM A536. Ends have smooth inside taper for uniform gasket seating GASKET: Nitrile (Buna N) certified to NSF/ANSI 61G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength to weight ratio BOLTS & NUTS: High strength low alloy Steel bolts with heavy, semi-finished hexagon nuts to WWA C219 (ANSI A21.11) Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. For other pipe materials, please contact Smith-Blair Engineering. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72592261126 shopify_US_72592261126_998581174278 new 257.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0004_grande.jpg?v=1515823047 Smith Blair 441-09850945-900 SB Coupling Adult Unisex SB Coupling 31.0 lb Smith Blair Dismantling Joint - 971 3 3 x 3 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487313926 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487313926 new 343.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-03000300-003 SB Joint Adult Unisex SB Joint 28.0 lb Smith Blair Dismantling Joint - 971 4 4 x 4 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487346694 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487346694 new 372.34 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-04000400-003 SB Joint Adult Unisex SB Joint 30.0 lb Smith Blair Dismantling Joint - 971 6 6 x 6 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487379462 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487379462 new 572.15 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-06000600-003 SB Joint Adult Unisex SB Joint 48.0 lb Smith Blair Dismantling Joint - 971 8 8 x 8 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487412230 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487412230 new 721.76 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-08000800-003 SB Joint Adult Unisex SB Joint 64.0 lb Smith Blair Dismantling Joint - 971 10 10 x 10 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487444998 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487444998 new 986.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-10001000-003 SB Joint Adult Unisex SB Joint 79.0 lb Smith Blair Dismantling Joint - 971 12 12 x 12 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487477766 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487477766 new 1,350.45 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-12001200-003 SB Joint Adult Unisex SB Joint 116.0 lb Smith Blair Dismantling Joint - 971 14 14 x 14 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487510534 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487510534 new 1,417.76 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-14001400-003 SB Joint Adult Unisex SB Joint 158.0 lb Smith Blair Dismantling Joint - 971 16 16 x 16 Alloy https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487543302 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487543302 new 1,846.24 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-16001600-003 SB Joint Adult Unisex SB Joint 202.0 lb Smith Blair Dismantling Joint - 971 3 3 x 3 304 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487936518 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487936518 new 418.17 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-03000300-031 SB Joint Adult Unisex SB Joint 28.0 lb Smith Blair Dismantling Joint - 971 4 4 x 4 305 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523487969286 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523487969286 new 446.81 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-04000400-031 SB Joint Adult Unisex SB Joint 30.0 lb Smith Blair Dismantling Joint - 971 6 6 x 6 306 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488002054 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488002054 new 676.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-06000600-031 SB Joint Adult Unisex SB Joint 48.0 lb Smith Blair Dismantling Joint - 971 8 8 x 8 307 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488034822 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488034822 new 818.00 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-08000800-031 SB Joint Adult Unisex SB Joint 64.0 lb Smith Blair Dismantling Joint - 971 10 10 x 10 308 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488067590 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488067590 new 1,198.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-10001000-031 SB Joint Adult Unisex SB Joint 79.0 lb Smith Blair Dismantling Joint - 971 12 12 x 12 309 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488100358 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488100358 new 1,561.77 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-12000200-031 SB Joint Adult Unisex SB Joint 116.0 lb Smith Blair Dismantling Joint - 971 14 14 x 14 310 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488133126 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488133126 new 1,678.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-14001400-031 SB Joint Adult Unisex SB Joint 158.0 lb Smith Blair Dismantling Joint - 971 16 16 x 16 311 Stainless Steel https://www.trupply.com/products/smith-blair-dismantling-joint-971?variant=523488165894 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which is non-restrained. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days•A wide variety of types and sizes available •Telescopes and adjusts to varying dimensions•Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flange gaskets with this fitting; no prying apart mated flanges necessary•Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Working Pressure: Up to 150 PSI. Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664706054 shopify_US_74664706054_523488165894 new 2,106.89 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_001_Image_0006_grande.jpg?v=1515823092 Smith Blair 971-16001600-031 SB Joint Adult Unisex SB Joint 202.0 lb Smith Blair Restrained Dismantling Joint - 973 3 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489214470 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489214470 new 772.71 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-03000300-003 SB Joint Adult Unisex SB Joint 36.0 lb Smith Blair Restrained Dismantling Joint - 973 4 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489247238 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489247238 new 830.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-04000400-003 SB Joint Adult Unisex SB Joint 53.0 lb Smith Blair Restrained Dismantling Joint - 973 6 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489280006 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489280006 new 987.06 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-06000600-003 SB Joint Adult Unisex SB Joint 75.0 lb Smith Blair Restrained Dismantling Joint - 973 8 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489312774 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489312774 new 1,169.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-08000800-003 SB Joint Adult Unisex SB Joint 98.0 lb Smith Blair Restrained Dismantling Joint - 973 10 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489345542 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489345542 new 1,642.32 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-10001000-003 SB Joint Adult Unisex SB Joint 130.0 lb Smith Blair Restrained Dismantling Joint - 973 12 https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-973?variant=523489378310 Restrained Dismantling Joint - 973Product Features: A fabricated Steel dismantling joint with integral restraint. Application: For insulating valves, meters and other flanged fittings Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30000 PSI T-BOLTS: HSLA (High Strength Low Alloy). Per ANSI/AWWA C111GASKET: Standard Mechanical Joint AWWA C111/ANSI A21.11 SBRFINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213. Other materials and flanges are available upon request Pipe Applications: Flanged pipe or flanged fittings Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664771590 shopify_US_74664771590_523489378310 new 2,245.46 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_033_Image_0001_grande.jpg?v=1515823052 Smith Blair 973-12001200-003 SB Joint Adult Unisex SB Joint 175.0 lb Smith Blair Restrained Dismantling Joint - 975 4 4 x 4 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492065286 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492065286 new 582.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-04000400-003 SB Joint Adult Unisex SB Joint 35.0 lb Smith Blair Restrained Dismantling Joint - 975 6 6 x 6 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492130822 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492130822 new 728.64 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-06000600-003 SB Joint Adult Unisex SB Joint 53.0 lb Smith Blair Restrained Dismantling Joint - 975 8 8 x 8 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492163590 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492163590 new 971.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-08000800-003 SB Joint Adult Unisex SB Joint 70.0 lb Smith Blair Restrained Dismantling Joint - 975 10 10 x 10 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492229126 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492229126 new 1,275.12 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-10001000-003 SB Joint Adult Unisex SB Joint 100.0 lb Smith Blair Restrained Dismantling Joint - 975 12 12 x 12 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492294662 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492294662 new 1,700.17 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-12001200-003 SB Joint Adult Unisex SB Joint 135.0 lb Smith Blair Restrained Dismantling Joint - 975 14 14 x 14 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492360198 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492360198 new 2,125.20 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-14001400-003 SB Joint Adult Unisex SB Joint 195.0 lb Smith Blair Restrained Dismantling Joint - 975 16 16 x 16 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492425734 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492425734 new 2,428.81 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-16001600-003 SB Joint Adult Unisex SB Joint 240.0 lb Smith Blair Restrained Dismantling Joint - 975 18 18 x 18 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492491270 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492491270 new 2,647.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-18001800-003 SB Joint Adult Unisex SB Joint 250.0 lb Smith Blair Restrained Dismantling Joint - 975 20 20 x 20 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492524038 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492524038 new 2,999.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-20002000-003 SB Joint Adult Unisex SB Joint 295.0 lb Smith Blair Restrained Dismantling Joint - 975 24 24 x 24 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492589574 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492589574 new 3,867.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-24002400-003 SB Joint Adult Unisex SB Joint 375.0 lb Smith Blair Restrained Dismantling Joint - 975 30 30 x 30 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492655110 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492655110 new 4,979.06 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-30003000-003 SB Joint Adult Unisex SB Joint 570.0 lb Smith Blair Restrained Dismantling Joint - 975 36 36 x 36 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492720646 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492720646 new 7,286.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-36003600-003 SB Joint Adult Unisex SB Joint 890.0 lb Smith Blair Restrained Dismantling Joint - 975 42 42 x 42 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492786182 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492786182 new 9,529.27 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-42004200-003 SB Joint Adult Unisex SB Joint 1140.0 lb Smith Blair Restrained Dismantling Joint - 975 48 48 x 48 Alloy https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523492851718 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523492851718 new 12,265.47 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-48004802-003 SB Joint Adult Unisex SB Joint 1420.0 lb Smith Blair Restrained Dismantling Joint - 975 4 4 x 4 304 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493146630 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493146630 new 637.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-04000400-031 SB Joint Adult Unisex SB Joint 35.0 lb Smith Blair Restrained Dismantling Joint - 975 6 6 x 6 305 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493212166 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493212166 new 844.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-06000600-031 SB Joint Adult Unisex SB Joint 53.0 lb Smith Blair Restrained Dismantling Joint - 975 8 8 x 8 306 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493277702 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493277702 new 1,080.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-08000800-031 SB Joint Adult Unisex SB Joint 70.0 lb Smith Blair Restrained Dismantling Joint - 975 10 10 x 10 307 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493343238 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493343238 new 1,457.29 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-10001000-031 SB Joint Adult Unisex SB Joint 100.0 lb Smith Blair Restrained Dismantling Joint - 975 12 12 x 12 308 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493376006 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493376006 new 1,858.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-12001200-031 SB Joint Adult Unisex SB Joint 135.0 lb Smith Blair Restrained Dismantling Joint - 975 14 14 x 14 309 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493441542 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493441542 new 2,380.23 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-14001400-031 SB Joint Adult Unisex SB Joint 195.0 lb Smith Blair Restrained Dismantling Joint - 975 16 16 x 16 310 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493507078 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493507078 new 2,671.69 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-16001600-031 SB Joint Adult Unisex SB Joint 240.0 lb Smith Blair Restrained Dismantling Joint - 975 18 18 x 18 311 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493572614 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493572614 new 3,339.61 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-18001800-031 SB Joint Adult Unisex SB Joint 250.0 lb Smith Blair Restrained Dismantling Joint - 975 20 20 x 20 312 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493638150 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493638150 new 3,837.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-20002000-031 SB Joint Adult Unisex SB Joint 295.0 lb Smith Blair Restrained Dismantling Joint - 975 24 24 x 24 313 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493703686 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493703686 new 4,972.98 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-24002400-031 SB Joint Adult Unisex SB Joint 375.0 lb Smith Blair Restrained Dismantling Joint - 975 30 30 x 30 314 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493769222 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493769222 new 6,375.62 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-30003000-031 SB Joint Adult Unisex SB Joint 570.0 lb Smith Blair Restrained Dismantling Joint - 975 36 36 x 36 315 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493801990 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493801990 new 9,180.89 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-36003600-031 SB Joint Adult Unisex SB Joint 890.0 lb Smith Blair Restrained Dismantling Joint - 975 42 42 x 42 316 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493834758 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493834758 new 12,390.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-42004200-031 SB Joint Adult Unisex SB Joint 1140.0 lb Smith Blair Restrained Dismantling Joint - 975 48 48 x 48 317 Stainless Steel https://www.trupply.com/products/smith-blair-restrained-dismantling-joint-975?variant=523493867526 Dismantling Joints - Non-Restrained - 971Product Features: Dismantling Joint which with heavy-duty joint restraint. Application: For valve, pump, meter and other flanged fitting installations Key Features: •Meets Applicable AWWA C219 Standards•No special tools required •Made to order, usually in only a few days •A wide variety of types and sizes available •Telescopes to adjust to varying dimensions •Allows some deflection for misaligned assemblies •Product makes it easy to install a flanged product in a new or existing setting •Easy to install flanged gaskets with this fitting; no prying apart mated flanges necessary •Joints are restrained when tie rods are used to secure the flanged fittings, making other joint restraints unnecessary •Ideal to use with flanged fittings like butterfly valves and pumps that require being pulled out of service for maintenance Materials Specifications (subject to change): FLANGED ADAPTER BODY: ASTM A53, ASTM A283 Gr. C or Carbon Steel having a minimum yield of 30,000 PSI FOLLOWER FLANGE: Ductile Iron per ASTM A536, Steel section per ASTM A576GR1020HR, or Carbon Steel having a minimum yield of 30,000 PSI GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61 FLANGE: Per AWWA C207 SPIGOT: ASTM A53, ASTM A512 or Carbon Steel having a minimum yield of 30,000 PSI STUDS: ASTM A325 or A307 TIE RODS: ASTM A 193 GR B7 FINISH: Flexi-Coat®, Fusion-Bonded epoxy per AWWA C213 Working Pressure: Up to 150 PSI Pipe Applications: Steel, Ductile Iron, Cast Iron Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74664837126 shopify_US_74664837126_523493867526 new 15,556.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_236_Image_0001_grande.jpg?v=1515859407 Smith Blair 975-48004802-031 SB Joint Adult Unisex SB Joint 1420.0 lb Smith Blair Cast Line Cap - 482 2 2.34 to 2.63 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529007622 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529007622 new 123.49 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00026306-900 SB Cap Unisex SB Cap 9.0 lb Smith Blair Cast Line Cap - 482 2.5 2.65 to 2.88 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529040390 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529040390 new 147.73 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00028806-900 SB Cap Unisex SB Cap 10.0 lb Smith Blair Cast Line Cap - 482 3 2.85 to 3.13 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529073158 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529073158 new 181.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00031306-900 SB Cap Unisex SB Cap 15.0 lb Smith Blair Cast Line Cap - 482 3 3.44 to 3.62 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529105926 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529105926 new 181.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00035006-900 SB Cap Unisex SB Cap 15.0 lb Smith Blair Cast Line Cap - 482 3 3.80 to 3.96 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529138694 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529138694 new 181.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00039606-900 SB Cap Unisex SB Cap 15.0 lb Smith Blair Cast Line Cap - 482 3 3.97 to 4.14 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529171462 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529171462 new 181.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00041406-900 SB Cap Unisex SB Cap 15.0 lb Smith Blair Cast Line Cap - 482 4 4.00 to 4.15 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529204230 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529204230 new 208.75 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00041506-900 SB Cap Unisex SB Cap 18.0 lb Smith Blair Cast Line Cap - 482 4 4.22 to 4.50 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529236998 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529236998 new 208.75 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00045006-900 SB Cap Unisex SB Cap 18.0 lb Smith Blair Cast Line Cap - 482 4 4.46 to 4.86 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529269766 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529269766 new 208.75 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00048606-900 SB Cap Unisex SB Cap 18.0 lb Smith Blair Cast Line Cap - 482 4 4.80 to 5.10 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529302534 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529302534 new 208.75 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00051006-900 SB Cap Unisex SB Cap 18.0 lb Smith Blair Cast Line Cap - 482 4 5.11 to 5.45 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529335302 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529335302 new 208.75 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00054506-900 SB Cap Unisex SB Cap 18.0 lb Smith Blair Cast Line Cap - 482 6 6.00 to 6.15 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529368070 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529368070 new 277.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00061506-900 SB Cap Unisex SB Cap 30.0 lb Smith Blair Cast Line Cap - 482 6 6.28 to 6.63 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529400838 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529400838 new 277.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00066306-900 SB Cap Unisex SB Cap 30.0 lb Smith Blair Cast Line Cap - 482 6 6.56 to 6.96 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529433606 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529433606 new 277.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00069606-900 SB Cap Unisex SB Cap 30.0 lb Smith Blair Cast Line Cap - 482 6 6.90 to 7.22 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529466374 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529466374 new 277.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00072206-900 SB Cap Unisex SB Cap 30.0 lb Smith Blair Cast Line Cap - 482 6 7.25 to 7.65 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529499142 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529499142 new 277.42 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00076506-900 SB Cap Unisex SB Cap 30.0 lb Smith Blair Cast Line Cap - 482 8 8.00 to 8.16 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529531910 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529531910 new 366.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00080006-900 SB Cap Unisex SB Cap 39.0 lb Smith Blair Cast Line Cap - 482 8 8.40 to 8.63 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529564678 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529564678 new 366.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00086306-900 SB Cap Unisex SB Cap 39.0 lb Smith Blair Cast Line Cap - 482 8 8.54 to 9.11 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529597446 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529597446 new 366.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00091106-900 SB Cap Unisex SB Cap 39.0 lb Smith Blair Cast Line Cap - 482 8 9.05 to 9.45 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529630214 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529630214 new 366.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00094506-900 SB Cap Unisex SB Cap 39.0 lb Smith Blair Cast Line Cap - 482 8 9.46 to 9.85 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529662982 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529662982 new 366.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00098506-900 SB Cap Unisex SB Cap 39.0 lb Smith Blair Cast Line Cap - 482 10 10 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=534219325446 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_534219325446 new 635.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00100006-900 SB Cap Unisex SB Cap 57.0 lb Smith Blair Cast Line Cap - 482 10 10.50 to 10.75 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529695750 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529695750 new 635.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00107506-900 SB Cap Unisex SB Cap 57.0 lb Smith Blair Cast Line Cap - 482 10 11.10 to 11.60 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529728518 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529728518 new 635.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00116006-900 SB Cap Unisex SB Cap 57.0 lb Smith Blair Cast Line Cap - 482 10 11.65 to 11.88 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529761286 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529761286 new 635.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00118806-900 SB Cap Unisex SB Cap 57.0 lb Smith Blair Cast Line Cap - 482 10 11.90 to 12.20 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529794054 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529794054 new 635.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00122006-900 SB Cap Unisex SB Cap 57.0 lb Smith Blair Cast Line Cap - 482 12 12 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=534219489286 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_534219489286 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00120006-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Cast Line Cap - 482 12 12.50 to 12.75 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529826822 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529826822 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00127506-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Cast Line Cap - 482 12 13.20 to 13.50 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529859590 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529859590 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00135006-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Cast Line Cap - 482 12 13.51 to 13.75 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529892358 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529892358 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00137506-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Cast Line Cap - 482 12 13.90 to 14.20 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529925126 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529925126 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00142006-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Cast Line Cap - 482 12 14.21 to 14.40 https://www.trupply.com/products/smith-blair-cast-line-cap-482?variant=998529957894 Cast Line Cap - 482Product Features: Steel end cap for remove and reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: •No special pipe end preparation required •Meets applicable AWWA C219 Standards •Can be custom made to fit unusual applications •Available in a wide variety of pipe O.D. sizes •Offset outlet makes it convenient to blow out or drain the pipeline •Pressure rating depends on many factors. Check with the factory for more details •Outlet is 2" NPT Standard Materials Specifications (subject to change):SLEEVE: Ductile Iron ASTM A-536. Ends have smooth inside taper for uniform gasket seating GASKETS: Nitrile (Buna N) Certified to NSF®/ANSI 61-G. Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals Temperature Range: -20F to 180F FOLLOWER FLANGES: Ductile Iron ASTM A536. Designed for high strength/weight ratio BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts. Optional: Stainless Steel and Carbon Steel ASTM A307 electro-galvanized with di-chromate seal FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500421126 shopify_US_75500421126_998529957894 new 832.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0007_96effbe8-5ca4-4aa2-84ae-809a308931a4_grande.jpg?v=1515823071 Smith Blair 482-00144006-900 SB Cap Unisex SB Cap 75.0 lb Smith Blair Steel Pipe End Cap - 481 2 2.38 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219718662 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219718662 new 357.17 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-02380114-003 SB Cap Unisex SB Cap 10.0 lb Smith Blair Steel Pipe End Cap - 481 2 2.5 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219751430 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219751430 new 357.17 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-02500114-003 SB Cap Unisex SB Cap 10.0 lb Smith Blair Steel Pipe End Cap - 481 3 3.5 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219784198 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219784198 new 406.66 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-03500114-003 SB Cap Unisex SB Cap 13.0 lb Smith Blair Steel Pipe End Cap - 481 3 3.74 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219816966 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219816966 new 406.66 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-03740114-003 SB Cap Unisex SB Cap 13.0 lb Smith Blair Steel Pipe End Cap - 481 3 3.8 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219849734 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219849734 new 406.66 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-03800114-003 SB Cap Unisex SB Cap 13.0 lb Smith Blair Steel Pipe End Cap - 481 3 3.88 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219882502 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219882502 new 406.66 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-03880114-003 SB Cap Unisex SB Cap 13.0 lb Smith Blair Steel Pipe End Cap - 481 3 3.96 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219915270 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219915270 new 406.66 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-03960114-003 SB Cap Unisex SB Cap 13.0 lb Smith Blair Steel Pipe End Cap - 481 4 4.5 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219948038 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219948038 new 430.16 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-04500114-003 SB Cap Unisex SB Cap 15.0 lb Smith Blair Steel Pipe End Cap - 481 4 4.64 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534219980806 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534219980806 new 430.16 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-04640114-003 SB Cap Unisex SB Cap 15.0 lb Smith Blair Steel Pipe End Cap - 481 4 4.8 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220013574 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220013574 new 430.16 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-04800114-003 SB Cap Unisex SB Cap 15.0 lb Smith Blair Steel Pipe End Cap - 481 6 6.63 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220046342 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220046342 new 469.12 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-06630114-003 SB Cap Unisex SB Cap 28.0 lb Smith Blair Steel Pipe End Cap - 481 6 6.9 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220079110 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220079110 new 469.12 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-06900114-003 SB Cap Unisex SB Cap 28.0 lb Smith Blair Steel Pipe End Cap - 481 8 7.65 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220111878 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220111878 new 548.83 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-07650114-003 SB Cap Unisex SB Cap 39.0 lb Smith Blair Steel Pipe End Cap - 481 8 8.63 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220144646 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220144646 new 548.83 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-08630114-003 SB Cap Unisex SB Cap 39.0 lb Smith Blair Steel Pipe End Cap - 481 8 9.05 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220177414 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220177414 new 548.83 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-09050114-003 SB Cap Unisex SB Cap 39.0 lb Smith Blair Steel Pipe End Cap - 481 10 10.75 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220210182 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220210182 new 948.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-10750114-003 SB Cap Unisex SB Cap 46.0 lb Smith Blair Steel Pipe End Cap - 481 10 11.1 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220242950 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220242950 new 948.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-11100114-003 SB Cap Unisex SB Cap 50.0 lb Smith Blair Steel Pipe End Cap - 481 10 11.4 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220275718 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220275718 new 948.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-11400114-003 SB Cap Unisex SB Cap 56.0 lb Smith Blair Steel Pipe End Cap - 481 10 11.66 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220308486 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220308486 new 948.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-11660114-003 SB Cap Unisex SB Cap 57.0 lb Smith Blair Steel Pipe End Cap - 481 12 12.75 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220341254 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220341254 new 1,158.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-12750114-003 SB Cap Unisex SB Cap 58.0 lb Smith Blair Steel Pipe End Cap - 481 12 13.2 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220374022 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220374022 new 1,158.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-13200114-003 SB Cap Unisex SB Cap 59.0 lb Smith Blair Steel Pipe End Cap - 481 12 13.5 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220406790 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220406790 new 1,158.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-13500114-003 SB Cap Unisex SB Cap 73.0 lb Smith Blair Steel Pipe End Cap - 481 12 13.92 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220439558 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220439558 new 1,158.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-13920114-003 SB Cap Unisex SB Cap 74.0 lb Smith Blair Steel Pipe End Cap - 481 14 14 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220472326 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220472326 new 1,329.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-14000114-003 SB Cap Unisex SB Cap 89.0 lb Smith Blair Steel Pipe End Cap - 481 14 15.3 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220505094 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220505094 new 1,329.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-15300114-003 SB Cap Unisex SB Cap 91.0 lb Smith Blair Steel Pipe End Cap - 481 14 15.65 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220537862 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220537862 new 1,329.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-15650114-003 SB Cap Unisex SB Cap 92.0 lb Smith Blair Steel Pipe End Cap - 481 16 16 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220570630 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220570630 new 1,465.10 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-16000114-003 SB Cap Unisex SB Cap 110.0 lb Smith Blair Steel Pipe End Cap - 481 16 17.4 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220603398 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220603398 new 1,465.10 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-17400114-003 SB Cap Unisex SB Cap 110.0 lb Smith Blair Steel Pipe End Cap - 481 16 17.8 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220636166 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220636166 new 1,465.10 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-17800114-003 SB Cap Unisex SB Cap 110.0 lb Smith Blair Steel Pipe End Cap - 481 18 19.5 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220668934 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220668934 new 1,525.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-19500114-003 SB Cap Unisex SB Cap 150.0 lb Smith Blair Steel Pipe End Cap - 481 18 19.92 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220701702 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220701702 new 1,525.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-19920114-003 SB Cap Unisex SB Cap 150.0 lb Smith Blair Steel Pipe End Cap - 481 20 21.6 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220734470 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220734470 new 1,655.22 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-21600114-003 SB Cap Unisex SB Cap 180.0 lb Smith Blair Steel Pipe End Cap - 481 20 22.06 https://www.trupply.com/products/smith-blair-steel-pipe-end-cap-481?variant=534220767238 Steel Pipe End Cap - 481Product Features: Steel end caps are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing. Application: Capping pipe ends. Key Features: • Easy to install • No special pipe end preparation required • Meets applicable AWWA C219 Standards • Can be custom made to fit unusual applications • Available in a wide variety of pipe O.D. sizes and sleeve lengths • Offset outlet makes it convenient to blow off or drain the pipeline • Pressure rating depends on many factors. Check with the factory for more details • Outlet is 2" NPT Standard, but a variety of other sizes are available to fit this application Materials Specifications (subject to change): SLEEVE: ASTM A53, ASTM A513 or Carbon Steel having a minimum yield of 30,000 PSI END PLATE: Mild Steel with a two-inch I.P. threaded outlet. Other outlet sizes available upon request FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 Steel GASKETS: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and other chemicals Temperature Range: -20F to +180F BOLTS & NUTS: High-strength, low alloy Steel with heavy, semi-finished hexagon nuts Optional: Stainless Steel FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish Working Pressure: Up to 250 PSI Pipe Applications: Cast Iron, PVC, Steel and PVC Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75500486662 shopify_US_75500486662_534220767238 new 1,655.22 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_133_Image_0006_grande.jpg?v=1515823057 Smith Blair 481-22060114-003 SB Cap Unisex SB Cap 180.0 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 4 4.8 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584287238 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584287238 new 61.30 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-04800000-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 6 6.9 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584320006 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584320006 new 76.55 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-06900000-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 8 9.05 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584352774 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584352774 new 105.34 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-09050000-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 10 11.1 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584385542 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584385542 new 176.54 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-11100000-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 12 13.2 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584418310 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584418310 new 186.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-13200000-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 14 15.3 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584451078 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584451078 new 317.46 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-15300000-000 SB Restraint Adult Unisex SB Restraint 55.4 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 16 17.4 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584483846 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584483846 new 394.22 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-17400000-000 SB Restraint Adult Unisex SB Restraint 68.4 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 18 19.5 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584516614 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584516614 new 476.76 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-19500000-000 SB Restraint Adult Unisex SB Restraint 74.8 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 20 21.6 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584549382 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584549382 new 578.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-21600000-000 SB Restraint Adult Unisex SB Restraint 86.9 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 24 25.8 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584582150 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584582150 new 669.28 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-25800000-000 SB Restraint Adult Unisex SB Restraint 109.8 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 30 32 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584614918 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584614918 new 1,879.61 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-32000000-000 SB Restraint Adult Unisex SB Restraint 291.0 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 36 38.3 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=505387352070 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_505387352070 new 2,375.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-38300000-000 SB Restraint Adult Unisex SB Restraint 370.1 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 3 3.5 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584647686 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584647686 new 60.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-03500000-001 SB Restraint Adult Unisex SB Restraint 11.0 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 4 4.5 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584680454 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584680454 new 60.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-04800000-001 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 6 6.63 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584713222 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584713222 new 75.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-06900000-001 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 8 8.63 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584745990 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584745990 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-09050000-001 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 10 10.75 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584778758 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584778758 new 173.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-11100000-001 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120 12 12.75 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraint-pvc-120?variant=998584811526 Cam-Lock Joint Restraint for PVC Pipe with a Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276574214 shopify_US_72276574214_998584811526 new 182.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_84825725-9eec-44e1-8c13-5135f56acdcb_grande.jpg?v=1515822904 Smith Blair 120-13200000-001 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with Multi-Seal Gasket - Model 120 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraint-pvc-multi-seal-120?variant=998585532422 Cam-Lock Joint Restraint on PVC Pipe with Multi-Seal Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276541446 shopify_US_72276541446_998585532422 new 62.47 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_fc5f5008-4488-4cd5-9b49-42633c14066d_grande.jpg?v=1515822935 Smith Blair 120-04500480-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with Multi-Seal Gasket - Model 120 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraint-pvc-multi-seal-120?variant=998585565190 Cam-Lock Joint Restraint on PVC Pipe with Multi-Seal Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276541446 shopify_US_72276541446_998585565190 new 78.73 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_fc5f5008-4488-4cd5-9b49-42633c14066d_grande.jpg?v=1515822935 Smith Blair 120-06630690-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with Multi-Seal Gasket - Model 120 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraint-pvc-multi-seal-120?variant=998585597958 Cam-Lock Joint Restraint on PVC Pipe with Multi-Seal Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276541446 shopify_US_72276541446_998585597958 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_fc5f5008-4488-4cd5-9b49-42633c14066d_grande.jpg?v=1515822935 Smith Blair 120-08630905-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with Multi-Seal Gasket - Model 120 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraint-pvc-multi-seal-120?variant=998585630726 Cam-Lock Joint Restraint on PVC Pipe with Multi-Seal Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276541446 shopify_US_72276541446_998585630726 new 183.32 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_fc5f5008-4488-4cd5-9b49-42633c14066d_grande.jpg?v=1515822935 Smith Blair 120-10751110-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraint for PVC Pipe with Multi-Seal Gasket - Model 120 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraint-pvc-multi-seal-120?variant=998585663494 Cam-Lock Joint Restraint on PVC Pipe with Multi-Seal Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276541446 shopify_US_72276541446_998585663494 new 193.24 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_fc5f5008-4488-4cd5-9b49-42633c14066d_grande.jpg?v=1515822935 Smith Blair 120-12751320-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal Kit - Model 120 4 4.50 to 4.80 4 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-kit-120?variant=998583697414 Cam-Lock Joint Restraint Multi-Seal Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276705286 shopify_US_72276705286_998583697414 new 20.88 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_grande.jpg?v=1515822933 Smith Blair 102-04500480-005 SB Restraint Adult Unisex SB Restraint 22.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal Kit - Model 120 6 6.63 to 6.90 6 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-kit-120?variant=998583730182 Cam-Lock Joint Restraint Multi-Seal Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276705286 shopify_US_72276705286_998583730182 new 30.14 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_grande.jpg?v=1515822933 Smith Blair 102-06630690-005 SB Restraint Adult Unisex SB Restraint 33.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal Kit - Model 120 8 8.63 to 9.05 6 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-kit-120?variant=998583762950 Cam-Lock Joint Restraint Multi-Seal Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276705286 shopify_US_72276705286_998583762950 new 35.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_grande.jpg?v=1515822933 Smith Blair 102-08630905-005 SB Restraint Adult Unisex SB Restraint 35.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal Kit - Model 120 10 10.75 to 11.10 8 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-kit-120?variant=998583795718 Cam-Lock Joint Restraint Multi-Seal Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276705286 shopify_US_72276705286_998583795718 new 46.62 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_grande.jpg?v=1515822933 Smith Blair 102-10751110-005 SB Restraint Adult Unisex SB Restraint 45.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal Kit - Model 120 12 12.75 to 13.20 8 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-kit-120?variant=998583828486 Cam-Lock Joint Restraint Multi-Seal Kit - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276705286 shopify_US_72276705286_998583828486 new 49.10 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_grande.jpg?v=1515822933 Smith Blair 102-12751320-005 SB Restraint Adult Unisex SB Restraint 48.0 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-gasket-120?variant=998583861254 Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 For IPS, Ductile Iron PVC, Ductile Iron and IPS Carbon Steel PipeProduct Descriptions:Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedgesdesigned to restrain a fitting on a piece of pipe .Application:Restraining pipe ends on mechanical joint fittings.Key Features:• Fewer wedges for time saving installations• Lower torque requirement to fully actuate bolts• Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe.• Corrosion resistant• Secondary hex shank for easy removal and re-installation• The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR18 PC 150 pipe, conforming to the requirements of AWWA C900Materials Specifications (subject to change):GLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single Tooth Ductile IronACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536)BREAKAWAY NUTS: Carbon SteelFINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276639750 shopify_US_72276639750_998583861254 new 7.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_88c8a426-e9bd-4481-9d62-df5eb87a4ca8_grande.jpg?v=1515822903 Smith Blair 000-00036735-060 SB Restraint Adult Unisex SB Restraint 0.5 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-gasket-120?variant=998583894022 Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 For IPS, Ductile Iron PVC, Ductile Iron and IPS Carbon Steel PipeProduct Descriptions:Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedgesdesigned to restrain a fitting on a piece of pipe .Application:Restraining pipe ends on mechanical joint fittings.Key Features:• Fewer wedges for time saving installations• Lower torque requirement to fully actuate bolts• Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe.• Corrosion resistant• Secondary hex shank for easy removal and re-installation• The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR18 PC 150 pipe, conforming to the requirements of AWWA C900Materials Specifications (subject to change):GLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single Tooth Ductile IronACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536)BREAKAWAY NUTS: Carbon SteelFINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276639750 shopify_US_72276639750_998583894022 new 8.34 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_88c8a426-e9bd-4481-9d62-df5eb87a4ca8_grande.jpg?v=1515822903 Smith Blair 000-00036736-060 SB Restraint Adult Unisex SB Restraint 0.6 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-gasket-120?variant=998583926790 Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 For IPS, Ductile Iron PVC, Ductile Iron and IPS Carbon Steel PipeProduct Descriptions:Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedgesdesigned to restrain a fitting on a piece of pipe .Application:Restraining pipe ends on mechanical joint fittings.Key Features:• Fewer wedges for time saving installations• Lower torque requirement to fully actuate bolts• Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe.• Corrosion resistant• Secondary hex shank for easy removal and re-installation• The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR18 PC 150 pipe, conforming to the requirements of AWWA C900Materials Specifications (subject to change):GLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single Tooth Ductile IronACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536)BREAKAWAY NUTS: Carbon SteelFINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276639750 shopify_US_72276639750_998583926790 new 12.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_88c8a426-e9bd-4481-9d62-df5eb87a4ca8_grande.jpg?v=1515822903 Smith Blair 000-00036737-060 SB Restraint Adult Unisex SB Restraint 0.8 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-gasket-120?variant=998583959558 Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 For IPS, Ductile Iron PVC, Ductile Iron and IPS Carbon Steel PipeProduct Descriptions:Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedgesdesigned to restrain a fitting on a piece of pipe .Application:Restraining pipe ends on mechanical joint fittings.Key Features:• Fewer wedges for time saving installations• Lower torque requirement to fully actuate bolts• Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe.• Corrosion resistant• Secondary hex shank for easy removal and re-installation• The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR18 PC 150 pipe, conforming to the requirements of AWWA C900Materials Specifications (subject to change):GLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single Tooth Ductile IronACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536)BREAKAWAY NUTS: Carbon SteelFINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276639750 shopify_US_72276639750_998583959558 new 16.14 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_88c8a426-e9bd-4481-9d62-df5eb87a4ca8_grande.jpg?v=1515822903 Smith Blair 000-00036738-060 SB Restraint Adult Unisex SB Restraint 1.1 lb Smith Blair Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraint-multi-seal-gasket-120?variant=998583992326 Cam-Lock Joint Restraint Multi-Seal MJ Gaskets - Model 120 For IPS, Ductile Iron PVC, Ductile Iron and IPS Carbon Steel PipeProduct Descriptions:Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedgesdesigned to restrain a fitting on a piece of pipe .Application:Restraining pipe ends on mechanical joint fittings.Key Features:• Fewer wedges for time saving installations• Lower torque requirement to fully actuate bolts• Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe.• Corrosion resistant• Secondary hex shank for easy removal and re-installation• The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR18 PC 150 pipe, conforming to the requirements of AWWA C900Materials Specifications (subject to change):GLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single Tooth Ductile IronACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536)BREAKAWAY NUTS: Carbon SteelFINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276639750 shopify_US_72276639750_998583992326 new 18.71 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_88c8a426-e9bd-4481-9d62-df5eb87a4ca8_grande.jpg?v=1515822903 Smith Blair 000-00036739-060 SB Restraint Adult Unisex SB Restraint 1.6 lb Smith Blair Cam-Lock Joint Restraint on CS - Model 120 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraint-cspipe-120?variant=998584057862 Cam-Lock Joint Restraint on Carbon Steel Pipe with Multi-Seal MJ Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276606982 shopify_US_72276606982_998584057862 new 60.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_14fe3204-d85a-46a3-9a6a-0c4c3131bd68_grande.jpg?v=1515822997 Smith Blair 111-04500480-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraint on CS - Model 120 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraint-cspipe-120?variant=998584090630 Cam-Lock Joint Restraint on Carbon Steel Pipe with Multi-Seal MJ Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276606982 shopify_US_72276606982_998584090630 new 75.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_14fe3204-d85a-46a3-9a6a-0c4c3131bd68_grande.jpg?v=1515822997 Smith Blair 111-06630690-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraint on CS - Model 120 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraint-cspipe-120?variant=998584123398 Cam-Lock Joint Restraint on Carbon Steel Pipe with Multi-Seal MJ Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276606982 shopify_US_72276606982_998584123398 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_14fe3204-d85a-46a3-9a6a-0c4c3131bd68_grande.jpg?v=1515822997 Smith Blair 111-08630905-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraint on CS - Model 120 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraint-cspipe-120?variant=998584156166 Cam-Lock Joint Restraint on Carbon Steel Pipe with Multi-Seal MJ Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276606982 shopify_US_72276606982_998584156166 new 173.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_14fe3204-d85a-46a3-9a6a-0c4c3131bd68_grande.jpg?v=1515822997 Smith Blair 111-10751110-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraint on CS - Model 120 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraint-cspipe-120?variant=998584188934 Cam-Lock Joint Restraint on Carbon Steel Pipe with Multi-Seal MJ Gasket - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276606982 shopify_US_72276606982_998584188934 new 182.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_14fe3204-d85a-46a3-9a6a-0c4c3131bd68_grande.jpg?v=1515822997 Smith Blair 111-12751320-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 3 3.96 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585761798 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585761798 new 53.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-03960000-000 SB Restraint Adult Unisex SB Restraint 10.5 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 4 4.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585794566 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585794566 new 53.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-04800000-000 SB Restraint Adult Unisex SB Restraint 11.8 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 6 6.9 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585827334 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585827334 new 65.98 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-06900000-000 SB Restraint Adult Unisex SB Restraint 17.8 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 8 9.05 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585860102 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585860102 new 89.83 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-09050000-000 SB Restraint Adult Unisex SB Restraint 20.3 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 10 11.1 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585892870 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585892870 new 124.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-11100000-000 SB Restraint Adult Unisex SB Restraint 32.5 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 12 13.2 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585925638 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585925638 new 170.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-13200000-000 SB Restraint Adult Unisex SB Restraint 40.4 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 14 15.3 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585958406 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585958406 new 245.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-15300000-000 SB Restraint Adult Unisex SB Restraint 53.6 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 16 17.4 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998585991174 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998585991174 new 303.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-17400000-000 SB Restraint Adult Unisex SB Restraint 66.3 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 18 19.5 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586023942 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586023942 new 414.96 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-19500000-000 SB Restraint Adult Unisex SB Restraint 72.2 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 20 21.6 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586056710 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586056710 new 501.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-21600000-000 SB Restraint Adult Unisex SB Restraint 83.8 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 24 25.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586089478 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586089478 new 602.63 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-25800000-000 SB Restraint Adult Unisex SB Restraint 106.9 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 30 32 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586122246 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586122246 new 1,682.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-32000000-000 SB Restraint Adult Unisex SB Restraint 287.9 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 36 38.3 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586155014 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586155014 new 2,162.99 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-38300000-000 SB Restraint Adult Unisex SB Restraint 366.3 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 42 44.5 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586187782 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586187782 new 3,180.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-44500000-000 SB Restraint Adult Unisex SB Restraint 585.1 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 48 50.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586220550 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586220550 new 4,077.30 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-50800000-000 SB Restraint Adult Unisex SB Restraint 679.5 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 3 3.96 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586253318 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586253318 new 36.45 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-03960001-900 SB Restraint Adult Unisex SB Restraint 6.5 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 4 4.8 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586286086 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586286086 new 36.45 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-04800001-900 SB Restraint Adult Unisex SB Restraint 7.1 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 6 6.9 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586318854 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586318854 new 43.36 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-06900001-900 SB Restraint Adult Unisex SB Restraint 11.2 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 8 9.05 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586351622 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586351622 new 65.67 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-09050001-900 SB Restraint Adult Unisex SB Restraint 13.1 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 10 11.1 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586384390 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586384390 new 93.48 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-11100001-900 SB Restraint Adult Unisex SB Restraint 26.0 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 12 13.2 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586417158 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586417158 new 136.61 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-13200001-900 SB Restraint Adult Unisex SB Restraint 31.5 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 14 15.3 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586449926 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586449926 new 175.41 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-15300001-900 SB Restraint Adult Unisex SB Restraint 43.3 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 16 17.4 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586482694 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586482694 new 250.31 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-17400001-900 SB Restraint Adult Unisex SB Restraint 54.1 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 18 19.5 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586515462 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586515462 new 351.80 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-19500001-900 SB Restraint Adult Unisex SB Restraint 59.8 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 20 21.6 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586548230 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586548230 new 438.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-21600001-900 SB Restraint Adult Unisex SB Restraint 69.8 lb Smith Blair Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120 24 25.8 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-di-cs-120?variant=998586580998 Cam-Lock Joint Restraint on DI Pipe and CS Pipe - Model 120Product Descriptions: Cam-Locks are mechanical joint gland with multiple and independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends on mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI size pipe. • Corrosion resistant• Secondary hex shank for easy removal and re-installation • The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4"-12" DR 18 PC 150 pipe, conforming to the requirements of AWWA C900 Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72276475910 shopify_US_72276475910_998586580998 new 523.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_010_Image_0001_efdff3d4-5c05-4de6-95b7-10199788b00e_grande.jpg?v=1515822905 Smith Blair 111-25800001-900 SB Restraint Adult Unisex SB Restraint 90.4 lb Smith Blair Cam-Lock Joint Restraints Model 111 3 3.96 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350389766 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350389766 new 53.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-03960000-000 SB Restraint Adult Unisex SB Restraint 10.5 lb Smith Blair Cam-Lock Joint Restraints Model 111 4 4.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350422534 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350422534 new 53.58 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-04800000-000 SB Restraint Adult Unisex SB Restraint 11.8 lb Smith Blair Cam-Lock Joint Restraints Model 111 6 6.9 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350455302 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350455302 new 65.98 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-06900000-000 SB Restraint Adult Unisex SB Restraint 17.8 lb Smith Blair Cam-Lock Joint Restraints Model 111 8 9.05 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350488070 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350488070 new 89.83 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-09050000-000 SB Restraint Adult Unisex SB Restraint 20.3 lb Smith Blair Cam-Lock Joint Restraints Model 111 10 11.1 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350520838 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350520838 new 124.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-11100000-000 SB Restraint Adult Unisex SB Restraint 32.5 lb Smith Blair Cam-Lock Joint Restraints Model 111 12 13.2 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350553606 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350553606 new 170.04 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-13200000-000 SB Restraint Adult Unisex SB Restraint 40.4 lb Smith Blair Cam-Lock Joint Restraints Model 111 14 15.3 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350586374 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350586374 new 245.40 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-15300000-000 SB Restraint Adult Unisex SB Restraint 53.6 lb Smith Blair Cam-Lock Joint Restraints Model 111 16 17.4 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350619142 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350619142 new 303.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-17400000-000 SB Restraint Adult Unisex SB Restraint 66.3 lb Smith Blair Cam-Lock Joint Restraints Model 111 18 19.5 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350684678 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350684678 new 414.96 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-19500000-000 SB Restraint Adult Unisex SB Restraint 72.2 lb Smith Blair Cam-Lock Joint Restraints Model 111 20 21.6 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350717446 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350717446 new 501.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-21600000-000 SB Restraint Adult Unisex SB Restraint 83.8 lb Smith Blair Cam-Lock Joint Restraints Model 111 24 25.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350750214 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350750214 new 602.63 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-25800000-000 SB Restraint Adult Unisex SB Restraint 106.9 lb Smith Blair Cam-Lock Joint Restraints Model 111 30 32 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350782982 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350782982 new 1,682.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-32000000-000 SB Restraint Adult Unisex SB Restraint 287.9 lb Smith Blair Cam-Lock Joint Restraints Model 111 36 38.3 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350815750 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350815750 new 2,162.99 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-38300000-000 SB Restraint Adult Unisex SB Restraint 366.3 lb Smith Blair Cam-Lock Joint Restraints Model 111 42 44.5 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350848518 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350848518 new 3,180.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-44500000-000 SB Restraint Adult Unisex SB Restraint 585.1 lb Smith Blair Cam-Lock Joint Restraints Model 111 48 50.8 With Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350881286 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350881286 new 4,077.30 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-50800000-000 SB Restraint Adult Unisex SB Restraint 679.5 lb Smith Blair Cam-Lock Joint Restraints Model 111 3 3.96 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350914054 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350914054 new 36.45 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-03960001-900 SB Restraint Adult Unisex SB Restraint 6.5 lb Smith Blair Cam-Lock Joint Restraints Model 111 4 4.8 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350946822 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350946822 new 36.45 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-04800001-900 SB Restraint Adult Unisex SB Restraint 7.1 lb Smith Blair Cam-Lock Joint Restraints Model 111 6 6.9 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505350979590 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505350979590 new 43.36 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-06900001-900 SB Restraint Adult Unisex SB Restraint 11.2 lb Smith Blair Cam-Lock Joint Restraints Model 111 8 9.05 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351012358 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351012358 new 65.67 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-09050001-900 SB Restraint Adult Unisex SB Restraint 13.1 lb Smith Blair Cam-Lock Joint Restraints Model 111 10 11.1 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351045126 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351045126 new 93.48 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-11100001-900 SB Restraint Adult Unisex SB Restraint 26.0 lb Smith Blair Cam-Lock Joint Restraints Model 111 12 13.2 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351077894 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351077894 new 136.61 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-13200001-900 SB Restraint Adult Unisex SB Restraint 31.5 lb Smith Blair Cam-Lock Joint Restraints Model 111 14 15.3 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351110662 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351110662 new 175.41 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-15300001-900 SB Restraint Adult Unisex SB Restraint 43.3 lb Smith Blair Cam-Lock Joint Restraints Model 111 16 17.4 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351143430 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351143430 new 250.31 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-17400001-900 SB Restraint Adult Unisex SB Restraint 54.1 lb Smith Blair Cam-Lock Joint Restraints Model 111 18 19.5 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351176198 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351176198 new 351.80 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-19500001-900 SB Restraint Adult Unisex SB Restraint 59.8 lb Smith Blair Cam-Lock Joint Restraints Model 111 20 21.6 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351208966 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351208966 new 438.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-21600001-900 SB Restraint Adult Unisex SB Restraint 69.8 lb Smith Blair Cam-Lock Joint Restraints Model 111 24 25.8 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-ductile-iron-111?variant=505351241734 Cam-Lock Joint Restraints for MJ Fittings on Ductile Iron Pipe and Carbon SteelProduct Descriptions: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe. Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with a pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274542598 shopify_US_72274542598_505351241734 new 523.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_007_Image_0001_grande.jpg?v=1515822992 Smith Blair 111-25800001-900 SB Restraint Adult Unisex SB Restraint 90.4 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal Kit - Model 111 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-kit-111?variant=998586712070 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274739206 shopify_US_72274739206_998586712070 new 20.88 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_grande.jpg?v=1515822993 Smith Blair 102-04500480-005 SB Restraint Adult Unisex 22.0 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal Kit - Model 111 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-kit-111?variant=998586744838 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274739206 shopify_US_72274739206_998586744838 new 30.14 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_grande.jpg?v=1515822993 Smith Blair 102-06630690-005 SB Restraint Adult Unisex 33.0 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal Kit - Model 111 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-kit-111?variant=998586777606 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274739206 shopify_US_72274739206_998586777606 new 35.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_grande.jpg?v=1515822993 Smith Blair 102-08630905-005 SB Restraint Adult Unisex 35.0 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal Kit - Model 111 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-kit-111?variant=998586810374 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274739206 shopify_US_72274739206_998586810374 new 46.62 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_grande.jpg?v=1515822993 Smith Blair 102-10751110-005 SB Restraint Adult Unisex 45.0 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal Kit - Model 111 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-kit-111?variant=998586843142 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274739206 shopify_US_72274739206_998586843142 new 49.10 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_grande.jpg?v=1515822993 Smith Blair 102-12751320-005 SB Restraint Adult Unisex 48.0 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal MJ Gaskets - Model 111 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-111?variant=998586908678 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274706438 shopify_US_72274706438_998586908678 new 7.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_d4cbc3cb-f745-4b9c-bb4d-bb3090550ad8_grande.jpg?v=1515822906 Smith Blair 000-00036735-060 SB Restraint Adult Unisex 0.5 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal MJ Gaskets - Model 111 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-111?variant=998586941446 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274706438 shopify_US_72274706438_998586941446 new 8.34 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_d4cbc3cb-f745-4b9c-bb4d-bb3090550ad8_grande.jpg?v=1515822906 Smith Blair 000-00036736-060 SB Restraint Adult Unisex 0.6 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal MJ Gaskets - Model 111 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-111?variant=998586974214 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274706438 shopify_US_72274706438_998586974214 new 12.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_d4cbc3cb-f745-4b9c-bb4d-bb3090550ad8_grande.jpg?v=1515822906 Smith Blair 000-00036737-060 SB Restraint Adult Unisex 0.8 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal MJ Gaskets - Model 111 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-111?variant=998587006982 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274706438 shopify_US_72274706438_998587006982 new 16.14 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_d4cbc3cb-f745-4b9c-bb4d-bb3090550ad8_grande.jpg?v=1515822906 Smith Blair 000-00036738-060 SB Restraint Adult Unisex 1.1 lb Smith Blair Cam-Lock Joint Restraints Multi-Seal MJ Gaskets - Model 111 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraints-multi-seal-111?variant=998587039750 Cam-Lock Joint Restraints Multi-Seal MJ GasketsProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274706438 shopify_US_72274706438_998587039750 new 18.71 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_d4cbc3cb-f745-4b9c-bb4d-bb3090550ad8_grande.jpg?v=1515822906 Smith Blair 000-00036739-060 SB Restraint Adult Unisex 1.6 lb Smith Blair Cam-Lock Joint Restraints on CS Pipe - Model 111 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-joint-restraints-carbon-steel-111?variant=998587072518 Cam-Lock Joint Restraints for MJ Fittings on Carbon Steel Pipe with Multi-Seal MJ GasketProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274673670 shopify_US_72274673670_998587072518 new 60.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_754ee11e-3a33-4f7d-8a71-f6dc3a68c354_grande.jpg?v=1515822936 Smith Blair 111-04500480-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraints on CS Pipe - Model 111 6 6.63 to 6.90 https://www.trupply.com/products/smith-blair-joint-restraints-carbon-steel-111?variant=998587105286 Cam-Lock Joint Restraints for MJ Fittings on Carbon Steel Pipe with Multi-Seal MJ GasketProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274673670 shopify_US_72274673670_998587105286 new 75.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_754ee11e-3a33-4f7d-8a71-f6dc3a68c354_grande.jpg?v=1515822936 Smith Blair 111-06630690-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraints on CS Pipe - Model 111 8 8.63 to 9.05 https://www.trupply.com/products/smith-blair-joint-restraints-carbon-steel-111?variant=998587138054 Cam-Lock Joint Restraints for MJ Fittings on Carbon Steel Pipe with Multi-Seal MJ GasketProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274673670 shopify_US_72274673670_998587138054 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_754ee11e-3a33-4f7d-8a71-f6dc3a68c354_grande.jpg?v=1515822936 Smith Blair 111-08630905-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraints on CS Pipe - Model 111 10 10.75 to 11.10 https://www.trupply.com/products/smith-blair-joint-restraints-carbon-steel-111?variant=998587203590 Cam-Lock Joint Restraints for MJ Fittings on Carbon Steel Pipe with Multi-Seal MJ GasketProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274673670 shopify_US_72274673670_998587203590 new 173.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_754ee11e-3a33-4f7d-8a71-f6dc3a68c354_grande.jpg?v=1515822936 Smith Blair 111-10751110-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraints on CS Pipe - Model 111 12 12.75 to 13.20 https://www.trupply.com/products/smith-blair-joint-restraints-carbon-steel-111?variant=998587236358 Cam-Lock Joint Restraints for MJ Fittings on Carbon Steel Pipe with Multi-Seal MJ GasketProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274673670 shopify_US_72274673670_998587236358 new 182.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_754ee11e-3a33-4f7d-8a71-f6dc3a68c354_grande.jpg?v=1515822936 Smith Blair 111-12751320-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 4 4.8 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351274502 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351274502 new 61.30 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-04800000-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 6 6.9 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351307270 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351307270 new 76.55 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-06900000-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 8 9.05 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351340038 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351340038 new 105.34 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-09050000-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 10 11.1 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351372806 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351372806 new 176.54 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-11100000-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 12 13.2 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351405574 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351405574 new 186.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-13200000-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 14 15.3 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351438342 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351438342 new 317.46 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-15300000-000 SB Restraint Adult Unisex SB Restraint 55.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 16 17.4 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351471110 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351471110 new 394.22 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-17400000-000 SB Restraint Adult Unisex SB Restraint 68.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 18 19.5 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351503878 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351503878 new 476.76 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-19500000-000 SB Restraint Adult Unisex SB Restraint 74.8 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 20 21.6 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351536646 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351536646 new 578.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-21600000-000 SB Restraint Adult Unisex SB Restraint 86.9 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 24 25.8 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351569414 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351569414 new 669.28 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-25800000-000 SB Restraint Adult Unisex SB Restraint 109.8 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 30 32 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351602182 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351602182 new 1,879.61 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-32000000-000 SB Restraint Adult Unisex SB Restraint 291.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 36 38.3 With D.I. Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351634950 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351634950 new 2,375.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-38300000-000 SB Restraint Adult Unisex SB Restraint 370.1 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 4 4.8 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351667718 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351667718 new 60.74 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-04800000-001 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 6 6.9 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351700486 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351700486 new 75.08 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-06900000-001 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 8 9.05 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351733254 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351733254 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-09050000-001 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 10 11.1 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351766022 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351766022 new 173.13 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-11100000-001 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Model 111 12 13.2 With IPS Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-kit-111?variant=505351798790 Cam-Lock Joint Restraints for MJ Fittings on PVC PipeProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274575366 shopify_US_72274575366_505351798790 new 182.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_4f3afe4a-c266-4e56-b3ce-fc1ad119c76d_grande.jpg?v=1515822902 Smith Blair 120-13200000-001 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Mulit-Seal - Model 111 4 4.50 to 4.80 With Multi to Seal MJ Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-multi-seal-111?variant=998587465734 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe with Multi-SealProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274608134 shopify_US_72274608134_998587465734 new 62.47 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_5f66e071-55de-410e-9b67-0d7ed0baeb19_grande.jpg?v=1515822998 Smith Blair 120-04500480-000 SB Restraint Adult Unisex SB Restraint 12.2 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Mulit-Seal - Model 111 6 6.63 to 6.90 With Multi to Seal MJ Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-multi-seal-111?variant=998587498502 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe with Multi-SealProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274608134 shopify_US_72274608134_998587498502 new 78.73 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_5f66e071-55de-410e-9b67-0d7ed0baeb19_grande.jpg?v=1515822998 Smith Blair 120-06630690-000 SB Restraint Adult Unisex SB Restraint 18.3 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Mulit-Seal - Model 111 8 8.63 to 9.05 With Multi to Seal MJ Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-multi-seal-111?variant=998587531270 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe with Multi-SealProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274608134 shopify_US_72274608134_998587531270 new 108.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_5f66e071-55de-410e-9b67-0d7ed0baeb19_grande.jpg?v=1515822998 Smith Blair 120-08630905-000 SB Restraint Adult Unisex SB Restraint 20.8 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Mulit-Seal - Model 111 10 10.75 to 11.10 With Multi to Seal MJ Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-multi-seal-111?variant=998587564038 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe with Multi-SealProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274608134 shopify_US_72274608134_998587564038 new 183.32 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_5f66e071-55de-410e-9b67-0d7ed0baeb19_grande.jpg?v=1515822998 Smith Blair 120-10751110-000 SB Restraint Adult Unisex SB Restraint 33.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe - Mulit-Seal - Model 111 12 12.75 to 13.20 With Multi to Seal MJ Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-multi-seal-111?variant=998587596806 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe with Multi-SealProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274608134 shopify_US_72274608134_998587596806 new 193.24 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_5f66e071-55de-410e-9b67-0d7ed0baeb19_grande.jpg?v=1515822998 Smith Blair 120-12751320-000 SB Restraint Adult Unisex SB Restraint 42.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 3 3.5 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505351995398 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505351995398 new 45.73 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-03500001-900 SB Restraint Adult Unisex SB Restraint 7.0 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 4 4.50 to 4.80 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=998587269126 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_998587269126 new 45.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-04800001-900 SB Restraint Adult Unisex SB Restraint 8.3 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 6 6.63 to 6.90 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=998587301894 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_998587301894 new 54.70 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-06900001-900 SB Restraint Adult Unisex SB Restraint 12.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 8 8.63 to 9.05 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=998587334662 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_998587334662 new 80.85 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-09050001-900 SB Restraint Adult Unisex SB Restraint 14.9 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 10 10.75 to 11.10 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=998587367430 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_998587367430 new 147.17 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-11100001-900 SB Restraint Adult Unisex SB Restraint 25.7 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 12 12.75 to 13.20 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=998587432966 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_998587432966 new 154.02 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-13200001-900 SB Restraint Adult Unisex SB Restraint 34.1 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 14 15.3 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505352192006 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505352192006 new 247.37 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-15300001-900 SB Restraint Adult Unisex SB Restraint 45.1 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 16 17.4 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505352224774 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505352224774 new 332.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-17400001-900 SB Restraint Adult Unisex SB Restraint 56.2 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 18 19.5 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505352257542 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505352257542 new 411.21 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-19500001-900 SB Restraint Adult Unisex SB Restraint 62.4 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 20 21.6 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505352290310 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505352290310 new 507.65 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-21600001-900 SB Restraint Adult Unisex SB Restraint 72.9 lb Smith Blair Cam-Lock Joint Restraints on PVC Pipe without a Kit - Model 111 24 25.8 Without Gasket, Nuts and Bolts https://www.trupply.com/products/smith-blair-joint-restraints-pvc-111?variant=505352323078 Cam-Lock Joint Restraints for MJ Fittings on PVC Pipe without a KitProduct Features: Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth, cam-action wedges designed to restrain a fitting on a piece of pipe.Application: Restraining pipe ends in mechanical joint fittings. Key Features: • Fewer wedges for time-saving installations • Breakaway nuts twist off at approximately 45-60 ft.-lbs., leaving cam engaged with the pipe. • Lower torque requirement to fully actuate bolts • Multi-Seal MJ Gasket available in 4"-12." Fits IPS or DI sized pipe. • Corrosion resistant • Secondary hex shank for easy removal and re-installation Materials Specifications (subject to change): GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single Tooth Ductile Iron, heat treated for Ductile Iron pipe applicationsACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) BREAKAWAY NUTS: Carbon Steel FINISH: Gland is Flexi-Coat® Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72274640902 shopify_US_72274640902_505352323078 new 609.12 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_006_Image_0001_0eb2da1e-259d-4ecb-986e-3afaa5fad658_grande.jpg?v=1515822907 Smith Blair 120-25800001-900 SB Restraint Adult Unisex SB Restraint 93.2 lb Smith Blair Serrated Joint Restraint for AWWA DI PVC Pipe 4 4.8 https://www.trupply.com/products/smith-blair-awwa-di-pvc-pipe?variant=505194577926 Serrated Joint Restraint for AWWA, Ductile Iron PVC PipeProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269004806 shopify_US_72269004806_505194577926 new 77.11 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_e1a2d594-b852-4a3f-9e5f-b4ee490adf04_grande.jpg?v=1515822996 Smith Blair 136-04800000-000 SB Restraint Adult Unisex SB Restraint 15.6 lb Smith Blair Serrated Joint Restraint for AWWA DI PVC Pipe 6 6.9 https://www.trupply.com/products/smith-blair-awwa-di-pvc-pipe?variant=505194610694 Serrated Joint Restraint for AWWA, Ductile Iron PVC PipeProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269004806 shopify_US_72269004806_505194610694 new 104.16 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_e1a2d594-b852-4a3f-9e5f-b4ee490adf04_grande.jpg?v=1515822996 Smith Blair 136-06900000-000 SB Restraint Adult Unisex SB Restraint 20.3 lb Smith Blair Serrated Joint Restraint for AWWA DI PVC Pipe 8 9.05 https://www.trupply.com/products/smith-blair-awwa-di-pvc-pipe?variant=505194643462 Serrated Joint Restraint for AWWA, Ductile Iron PVC PipeProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269004806 shopify_US_72269004806_505194643462 new 170.35 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_e1a2d594-b852-4a3f-9e5f-b4ee490adf04_grande.jpg?v=1515822996 Smith Blair 136-09050000-000 SB Restraint Adult Unisex SB Restraint 31.0 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 4 4.8 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194676230 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194676230 new 62.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-04800000-000 SB Restraint Adult Unisex SB Restraint 15.6 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 6 6.9 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194708998 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194708998 new 77.95 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-06900000-000 SB Restraint Adult Unisex SB Restraint 20.3 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 8 9.05 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194741766 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194741766 new 127.86 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-09050000-000 SB Restraint Adult Unisex SB Restraint 31.0 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 10 11.1 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194774534 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194774534 new 223.99 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-11100000-000 SB Restraint Adult Unisex SB Restraint 52.1 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 12 13.2 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194807302 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194807302 new 245.20 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-13200000-000 SB Restraint Adult Unisex SB Restraint 56.3 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 14 15.3 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194840070 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194840070 new 604.76 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-15300000-000 SB Restraint Adult Unisex SB Restraint 123.0 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 16 17.4 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194872838 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194872838 new 670.44 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-17400000-000 SB Restraint Adult Unisex SB Restraint 133.7 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 18 19.5 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194905606 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194905606 new 798.15 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-19500000-000 SB Restraint Adult Unisex SB Restraint 175.6 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 20 21.6 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194938374 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194938374 new 966.79 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-21600000-000 SB Restraint Adult Unisex SB Restraint 201.3 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 24 25.8 Ductile Iron https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505194971142 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505194971142 new 1,197.88 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-25800000-000 SB Restraint Adult Unisex SB Restraint 265.8 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 4 4.5 IPS https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505195003910 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505195003910 new 61.18 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-04500000-000 SB Restraint Adult Unisex SB Restraint 16.6 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 6 6.63 IPS https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505195036678 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505195036678 new 82.62 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-06630000-000 SB Restraint Adult Unisex SB Restraint 22.1 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 8 8.63 IPS https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505195069446 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505195069446 new 132.02 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-08630000-000 SB Restraint Adult Unisex SB Restraint 34.6 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 10 10.75 IPS https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505195102214 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505195102214 new 231.33 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-10750000-000 SB Restraint Adult Unisex SB Restraint 56.7 lb Smith Blair Serrated Joint Restraint For Bell and Spigot PVC Joints 12 12.75 IPS https://www.trupply.com/products/smith-blair-bell-spigot-pvc-joints?variant=505195134982 Serrated Joint Restraint For Bell and Spigot PVC JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop CoatA serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings. Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72269037574 shopify_US_72269037574_505195134982 new 250.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_270432e2-dbe7-4fcc-92bd-cbd5367fba8a_grande.jpg?v=1515822901 Smith Blair 165-12750000-000 SB Restraint Adult Unisex SB Restraint 62.7 lb Smith Blair Serrated Joint Restraint For MJ Fittings 4 4.8 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194086406 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194086406 new 42.11 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-04800000-000 SB Restraint Adult Unisex SB Restraint 7.8 lb Smith Blair Serrated Joint Restraint For MJ Fittings 6 6.9 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194119174 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194119174 new 51.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-06900000-000 SB Restraint Adult Unisex SB Restraint 10.2 lb Smith Blair Serrated Joint Restraint For MJ Fittings 8 9.05 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194151942 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194151942 new 79.28 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-09050000-000 SB Restraint Adult Unisex SB Restraint 15.5 lb Smith Blair Serrated Joint Restraint For MJ Fittings 10 11.1 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194184710 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194184710 new 144.71 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-11100000-000 SB Restraint Adult Unisex SB Restraint 25.5 lb Smith Blair Serrated Joint Restraint For MJ Fittings 12 13.2 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194217478 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194217478 new 155.27 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-13200000-000 SB Restraint Adult Unisex SB Restraint 27.6 lb Smith Blair Serrated Joint Restraint For MJ Fittings 14 15.3 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194250246 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194250246 new 366.24 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-15300000-000 SB Restraint Adult Unisex SB Restraint 63.1 lb Smith Blair Serrated Joint Restraint For MJ Fittings 16 17.4 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194283014 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194283014 new 387.82 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-17400000-000 SB Restraint Adult Unisex SB Restraint 68.5 lb Smith Blair Serrated Joint Restraint For MJ Fittings 18 19.5 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194315782 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194315782 new 486.97 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-19500000-000 SB Restraint Adult Unisex SB Restraint 90.0 lb Smith Blair Serrated Joint Restraint For MJ Fittings 20 21.6 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194348550 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194348550 new 577.54 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-21600000-000 SB Restraint Adult Unisex SB Restraint 100.6 lb Smith Blair Serrated Joint Restraint For MJ Fittings 24 25.8 Ductile Iron https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194381318 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194381318 new 703.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-25800000-000 SB Restraint Adult Unisex SB Restraint 132.9 lb Smith Blair Serrated Joint Restraint For MJ Fittings 4 4.5 IPS https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194414086 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194414086 new 41.72 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-04500000-000 SB Restraint Adult Unisex SB Restraint 8.3 lb Smith Blair Serrated Joint Restraint For MJ Fittings 6 6.63 IPS https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194446854 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194446854 new 50.88 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-06630000-000 SB Restraint Adult Unisex SB Restraint 11.1 lb Smith Blair Serrated Joint Restraint For MJ Fittings 8 8.63 IPS https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194479622 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194479622 new 77.87 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-08630000-000 SB Restraint Adult Unisex SB Restraint 17.3 lb Smith Blair Serrated Joint Restraint For MJ Fittings 10 10.75 IPS https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194512390 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194512390 new 144.71 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-10750000-000 SB Restraint Adult Unisex SB Restraint 27.8 lb Smith Blair Serrated Joint Restraint For MJ Fittings 12 12.75 IPS https://www.trupply.com/products/smith-blair-serrated-joint-restraint-fittings?variant=505194545158 Serrated Joint Restraints For MJ Fittings and Push-On JointsProduct Features: A serrated restraint used for MJ type fittings. Application: For restraining pipe MJ fittings.Key Features: • Recessed shoulders allow for single wrench installation • Compatible with standard mechanical joint and some push-on style fittings • Maintains full pipe deflection • 360° of pipe support provided - uncompromised restraint • Adaptable for new and/or existing pipeline applications • Easily installs outside the trench • Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change): RESTRAINER: 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS: High strength, low alloy CLAMPING BOLTS: SAE Grade 5, ASTM A449 Type 1, or approved equivalent FINISH: Shop Coat Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_72268972038 shopify_US_72268972038_505194545158 new 155.27 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_005_Image_0005_grande.jpg?v=1515822900 Smith Blair 115-12750000-000 SB Restraint Adult Unisex SB Restraint 30.8 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 5/8 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535004166 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535004166 new 130.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053205-000 SB Saddle Adult Unisex SB Saddle 8.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 3/4 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535036934 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535036934 new 130.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053206-000 SB Saddle Adult Unisex SB Saddle 8.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 3/4 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535069702 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535069702 new 130.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053207-000 SB Saddle Adult Unisex SB Saddle 8.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535102470 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535102470 new 130.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053208-000 SB Saddle Adult Unisex SB Saddle 8.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535135238 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535135238 new 130.52 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053209-000 SB Saddle Adult Unisex SB Saddle 8.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1.25 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535168006 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535168006 new 147.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053210-000 SB Saddle Adult Unisex SB Saddle 9.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1.25 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535200774 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535200774 new 147.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053211-000 SB Saddle Adult Unisex SB Saddle 9.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1.5 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535233542 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535233542 new 147.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053212-000 SB Saddle Adult Unisex SB Saddle 9.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 1.5 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535266310 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535266310 new 147.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053213-000 SB Saddle Adult Unisex SB Saddle 9.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 4 4.79 to 5.32 2 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535299078 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535299078 new 147.91 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00053214-000 SB Saddle Adult Unisex SB Saddle 9.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 5/8 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535331846 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535331846 new 147.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074005-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 3/4 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535364614 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535364614 new 147.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074006-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 3/4 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535397382 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535397382 new 147.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074007-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535430150 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535430150 new 147.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074008-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535462918 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535462918 new 147.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074009-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1.25 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535495686 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535495686 new 162.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074010-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1.25 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535528454 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535528454 new 162.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074011-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1.5 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535561222 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535561222 new 162.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074012-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 1.5 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535593990 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535593990 new 162.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074013-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 6 6.90 to 7.40 2 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535626758 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535626758 new 162.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00074014-000 SB Saddle Adult Unisex SB Saddle 10.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 5/8 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535659526 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535659526 new 170.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096305-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 3/4 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535692294 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535692294 new 170.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096306-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 3/4 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535725062 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535725062 new 170.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096307-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535757830 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535757830 new 170.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096308-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535790598 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535790598 new 170.50 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096309-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1.25 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535823366 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535823366 new 220.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096310-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1.25 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535856134 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535856134 new 220.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096311-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1.5 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535888902 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535888902 new 220.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096312-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 1.5 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535921670 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535921670 new 220.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096313-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 8 9.00 to 9.63 2 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535954438 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535954438 new 220.43 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00096314-000 SB Saddle Adult Unisex SB Saddle 12.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 5/8 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998535987206 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998535987206 new 212.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121205-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 3/4 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536019974 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536019974 new 212.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121206-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 3/4 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536052742 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536052742 new 212.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121207-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536085510 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536085510 new 212.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121208-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536118278 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536118278 new 212.92 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121209-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1.25 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536151046 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536151046 new 232.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121210-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1.25 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536183814 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536183814 new 232.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121211-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1.5 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536216582 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536216582 new 232.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121212-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 1.5 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536249350 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536249350 new 232.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121213-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 10 11.04 to 12.12 2 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536282118 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536282118 new 232.01 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00121214-000 SB Saddle Adult Unisex SB Saddle 13.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 5/8 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536314886 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536314886 new 306.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143805-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 3/4 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536347654 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536347654 new 306.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143806-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 3/4 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536380422 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536380422 new 306.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143807-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536413190 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536413190 new 306.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143808-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536445958 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536445958 new 306.93 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143809-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1.25 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536478726 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536478726 new 333.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143810-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1.25 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536511494 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536511494 new 333.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143811-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1.5 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536544262 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536544262 new 333.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143812-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 1.5 CC https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536577030 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536577030 new 333.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143813-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Service Saddle - DI Body, Double Bale - 331 12 13.14 to 14.38 2 NPT https://www.trupply.com/products/smith-blair-service-saddle-331?variant=998536609798 Service Saddle - Ductile Iron Body - Double Bale - 331Product Features: Double bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales. Application: Pulled out or broken direct taps, stripped threads, cracked pipe or new installations where wide gasket coverage is desired. Key Features: •Meets applicable AWWA C800 Standards •The wide saddle body provides stability on the pipe •Concentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal •NPT, CC and other threaded outlets available in sizes 5/8" to 2"•Excellent way to repair and restore a damaged branch connection in one operation •In conjunction with the bales, a closed lug on one side acts as a hinge for easier installation Materials Specifications (subject to change):BODIES: Ductile Iron per ASTM A536 BALES: Carbon Steel ASTM A108 (C1018) or HSLA (C111) electro-galvanized with di-chromate seal ASTM B633 NUTS: Cold formed semi-finished heavy hex Steel A563 electro-galvanized with di-chromate seal ASTM B633 WASHERS: Carbon Steel ASTM A108, electro-galvanized with a dichromate seal ASTM B633 GASKET: Nitrile (Buna N) NSF 61 compounded to resist oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and other chemicals Temperature Range: -20°F to 180°F FINISH: Flexi-Coat® Fusion-Bonded Epoxy Finish per AWWA C213 Optional Bales: Type 304 Stainless Steel Working Pressure: Up to 300 PSI, depending on size and application Pipe Applications: Steel, Ductile Iron, Cast Iron, Asbestos Cement Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_74573774854 shopify_US_74573774854_998536609798 new 333.51 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_120_Image_0001_grande.jpg?v=1515823051 Smith Blair 331-00143814-000 SB Saddle Adult Unisex SB Saddle 15.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 4 x 4 4.50 to 4.80 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491422726 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491422726 new 757.72 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-04800400-200 SB Tapping Adult Unisex SB Tapping 32.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 4 x 4 4.80 to 5.10 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491455494 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491455494 new 757.72 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-05000400-200 SB Tapping Adult Unisex SB Tapping 32.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 4 6.59 to 6.99 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491488262 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491488262 new 743.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-06630400-000 SB Tapping Adult Unisex SB Tapping 55.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 6 6.59 to 6.99 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491521030 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491521030 new 849.86 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-06630600-200 SB Tapping Adult Unisex SB Tapping 61.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 4 6.84 to 7.30 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491553798 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491553798 new 743.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-06900400-000 SB Tapping Adult Unisex SB Tapping 55.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 6 6.84 to 7.30 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491586566 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491586566 new 849.86 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-06900600-200 SB Tapping Adult Unisex SB Tapping 61.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 4 7.10 to 7.50 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491619334 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491619334 new 743.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-07200400-000 SB Tapping Adult Unisex SB Tapping 55.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 6 7.10 to 7.50 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491652102 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491652102 new 849.86 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-07200600-200 SB Tapping Adult Unisex SB Tapping 61.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 4 7.40 to 7.80 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491684870 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491684870 new 743.09 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-07450400-000 SB Tapping Adult Unisex SB Tapping 55.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 6 x 6 7.40 to 7.80 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491717638 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491717638 new 849.86 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-07450600-200 SB Tapping Adult Unisex SB Tapping 61.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 4 7.90 to 8.30 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491750406 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491750406 new 817.64 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-08000400-000 SB Tapping Adult Unisex SB Tapping 64.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 6 7.90 to 8.30 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491783174 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491783174 new 856.69 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-08000600-000 SB Tapping Adult Unisex SB Tapping 72.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 4 8.65 to 9.06 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491815942 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491815942 new 817.64 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-08630400-000 SB Tapping Adult Unisex SB Tapping 64.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 6 8.65 to 9.06 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491848710 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491848710 new 856.69 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-08630600-000 SB Tapping Adult Unisex SB Tapping 72.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 8 8.65 to 9.06 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491881478 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491881478 new 1,080.57 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-08630800-200 SB Tapping Adult Unisex SB Tapping 93.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 4 8.99 to 9.45 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491914246 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491914246 new 817.64 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-09050400-000 SB Tapping Adult Unisex SB Tapping 64.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 6 8.99 to 9.45 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491947014 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: up to +180F BOLTS, NUTS & WASHERS: 18-8 Type 304 Stainless Steel heavy hex nuts, bolts & washers. Nuts and studs are coated to prevent galling Working Pressure: Up to 150 PSI Pipe Applications: Steel, Cast Iron, Asbestos Cement, PVC and other. Hardware > Plumbing > Plumbing Fittings & Supports shopify_US_75542298630 shopify_US_75542298630_998491947014 new 856.69 USD in stock http://cdn.shopify.com/s/files/1/0881/7528/products/water_catalog_Page_183_Image_0004_70c163e5-1292-424d-9047-b884b7473efe_grande.jpg?v=1515823099 Smith Blair 664-09050600-000 SB Tapping Adult Unisex SB Tapping 72.0 lb Smith Blair Carbon Steel Tapping Sleeves - 664 (4.5-14.09) 8 x 8 8.99 to 9.45 https://www.trupply.com/products/smith-blair-tapping-sleeve-6644-5-14-09?variant=998491979782 Carbon Steel Tapping Sleeves - 664Product Features: Stainless Steel tapping sleeve with epoxy-coated Carbon Steel flange and removable bolts. Application: For tapping reducing and size-on-size flanged outlets Key Features: •Easy to install •Range helps reduce inventory •Meets applicable AWWA C223 Standards •Molded-in ring in the gasket to ensure effective sealing •Nylon washers to improve bolt torque capability •Heavy gauge, all-Stainless Steel body for rugged performance •Fully chemically passivated for maximum corrosion protection •¾" test outlet to allow hydrostatic pressure test before tapping the pipe •360º seal provides maximum support and reinforcement around the pipe in case of pipe break •Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress Materials Specifications (subject to change): BODY: Full circumference band. 18-8 type 304 Stainless Steel FLANGES: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve per MSS-SP 60. Fusion-Bonded, Flexi-Coat® epoxy coated Carbon Steel Optional: Other types of Flanges, threaded outlets, MJ Outlets GASKET: Nitrile (Buna-N) NSF-61 compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature